Veriflam® AXT-W1
The Veriflam® AXT-W1 non-combustible adhesive is compatible with the Veriflam® XT-W1. It is a protective adhesive made of silicone paper, adhesive mass and glass fabric.
Euroclass A2-s1,d0
The Veriflam®AXT-W1 has a high UV resistance. Easy to install and reinforced with glass fabric, it has a high tear resistance. It should be used at temperatures above +5°C (lower temperatures not tested).
Euroclass A2-s1,d0
• Tensile strength: Warp: 750 N/cmIWeft: 600 N/cm
• Tensile strength: Longitudinal: 4,200 N/50mm – EN 12311-1/ Transverse: 3,100 N/50mm – EN 12311-1
• Tear Strength: Longitudinal: 290 N – EN 12310-1/ Transverse: 390 N – EN 12310-1
• Elongation: Longitudinal: 6% – EN 12311-1/ Transverse: 5% – EN 12311-1
• Peel resistance: after 72 hours: 20 N/50mm – EN 12316-1
Storage in a room out of water and air, at temperatures between +5 °C and +23 °C.
Store preferably in a cool and dry place.
For more details, please visit Protecflam Industries.
-
Made in FranceSome of our flame-retardant solutions are manufactured in France, at our factories in Loire-Atlantique, drawing on our expertise and in-house R&D department. This expertise enables us to refine our formulations and meet specific requirements.
-
Tests and performanceOur solutions are tested by accredited laboratories in accordance with current standards and protocols. The results of these tests are used to draw up technical documents certifying the performance and fire resistance of the products in question.
-
Technical ExpertiseFor over 25 years, Protecflam has been developing its expertise in the field of passive fire protection and the fire retardancy treatment of a wide range of materials. This experience enables us to support each project with an approach tailored to its specific requirements.
-
Personalized SupportFrom identifying your requirements to selecting the most suitable solution, our team is here to support you with your flame-retardant treatment projects. Whether it’s a workshop-based treatment or an on-site service, we tailor our approach to the specific requirements of your project.
