Plastiflam® AT712 Adhesive
Set of 3 fireproof adhesive tapes in glossy canvas, extruded polyethylene, with PMUC (Products and Materials Usable in Plants) approval. White colour.
Width of a roll: 50 mm
Roll length: 50 ml
Sold in multiples of 3 rolls. If you buy 2 units, that’s 6 rolls.
Risk of stock shortages, contact us for availability
Protecflam Industries’ Plastiflam® AT712 flame retardant adhesive is a glossy extruded polyethylene cloth tape, coated with a very strong white pressure-sensitive adhesive. It is M1 flame retardant and is PMUC (Products and Materials for Use in Power Plants) approved.
Plastiflam® AT712 flame retardant adhesive has a low halogen content, is very easy to cut, and is glue-free. Its surface is writable, and its finish is waterproof. It is conformable and non-corrosive. It is specially designed for film jointing and containment.
Applications in the fields of the naval industry, railways, the construction of ERP or high-rise buildings, but mainly in the nuclear field.
The recommended temperature for its use, with the aim of obtaining the best results, is between 10 and 45°C.
The substrate must be clean, dry, dust-free and free of any contaminating or greasy substances.
Tearable by hand.
Tested and validated in use coupled with Plastiflam®, Plastiflam®, Polymat PMUC, Plastiflam® TB and Fibroflam Industries’ Fibroflam® flame retardant HDF panels.
Fire Rating Documents (provided with the invoice)
M1 classification according to PV n° RA16-0302.
Storage
Storage ina room that is free of water and air, at temperatures between +12°C and +25°C, for approximately 12 months from the date of manufacture. A period of 24 hours may be necessary if the tapes are stored below the recommended minimum temperature.
Protect from moisture!
Safety
notesFor more details, please refer to the valid safety data sheet from Protecflam Industries.
-
Made in FranceSome of our flame-retardant solutions are manufactured in France, at our factories in Loire-Atlantique, drawing on our expertise and in-house R&D department. This expertise enables us to refine our formulations and meet specific requirements.
-
Tests and performanceOur solutions are tested by accredited laboratories in accordance with current standards and protocols. The results of these tests are used to draw up technical documents certifying the performance and fire resistance of the products in question.
-
Technical ExpertiseFor over 25 years, Protecflam has been developing its expertise in the field of passive fire protection and the fire retardancy treatment of a wide range of materials. This experience enables us to support each project with an approach tailored to its specific requirements.
-
Personalized SupportFrom identifying your requirements to selecting the most suitable solution, our team is here to support you with your flame-retardant treatment projects. Whether it’s a workshop-based treatment or an on-site service, we tailor our approach to the specific requirements of your project.
