Hydroflam® TN12 IBC
Hydroflam® TN12 is a flame retardant that delays ignition and limits the spread of flames in naturally occurring fabrics such as cotton, burlap, velvet, damask, muslin, etc.
M1 classification according to NF P92-512 standard. FCBA PV n° CM-17-P-064 ( cotton support)
M1 classification according to NF P92-512 standard. FCBA report n° CM-17-P-065 ( linen support)
Wholesale and semi-wholesale packaging.
We also offer to fireproof your supports in our workshops, do not hesitate to contact us for any request or quote.
Out of stock
Hydroflam® TN12 comes in liquid form (without VOCs or formaldehyde), odorless and colorless. It is ready to use. It can be colored (powder dye or liquid acrylic) to obtain an aesthetic effect or traceability. The fireproof material, once dry, can be tinted but only with non-downgrading products.
Prevents the spread of flames and fire and reduces the development of smoke.
Must be used in dry, enclosed indoor spaces.
Implementation and preparation of the substrate
The substrate must be dry, free of dust, oil, wax, grease, dirt, resin, etc.
Hydroflam® TN12 can be applied in 3 ways on dry, porous, double-sided substrates:
- By “refusal” spraying with a flat jet nozzle.
- By soaking (total immersion in the flame retardant).
- By scarfing (pay-off rate according to other treatments and desired results).
It is advisable to let it dry between 12 and 72 hours depending on the temperature and humidity, in a natural or accelerated way. A slight shrinkage of the fiber may occur.
Indicative returns
The consumption of Hydroflam® TN12 varies according to the nature, composition, mass of the substrate and the target fire classification. In general, the carrying rate of Hydroflam® TN12 must be around 30% of the mass of the substrate to be treated.
For example, to fire retardant a 200 g cotton fabric, 60 g of Hydroflam® TN12 will be required. The mass of the wet fabric before drying must be 260 g.
Protect against frost!
-
Made in FranceSome of our flame-retardant solutions are manufactured in France, at our factories in Loire-Atlantique, drawing on our expertise and in-house R&D department. This expertise enables us to refine our formulations and meet specific requirements.
-
Tests and performanceOur solutions are tested by accredited laboratories in accordance with current standards and protocols. The results of these tests are used to draw up technical documents certifying the performance and fire resistance of the products in question.
-
Technical ExpertiseFor over 25 years, Protecflam has been developing its expertise in the field of passive fire protection and the fire retardancy treatment of a wide range of materials. This experience enables us to support each project with an approach tailored to its specific requirements.
-
Personalized SupportFrom identifying your requirements to selecting the most suitable solution, our team is here to support you with your flame-retardant treatment projects. Whether it’s a workshop-based treatment or an on-site service, we tailor our approach to the specific requirements of your project.
