Plastiflam® Retrac / 280
Plastiflam® Retrac 280 is a flame-retardant heat shrink film made of bi-axial low-density polyethylene (LDPE) (longitudinal and transverse shrinkage).
Colour: white, opaque.
7.25 m wide.
Complete roll of 15 ml (contact us).
Sale in multiples of 5 linear meters, i.e. 36.5 m2 (approx. 10.5 kg). Contact us for availability.
Plastiflam® Retrac 280 is a heat-shrink film or not, intended for the protection of property or used to make tensile structures for containment, area separations and packaging with load stabilization. It can be used indoors or outdoors.
Plastiflam® Retrac 280 is retracted by raising the temperature using a heated gun with a warm nozzle (40 to 65 kW). It is fixed by heat welding, folded on itself and heated, or using specific aluminium profiles (contact us).
It is not recommended to drag the film on rough surfaces that may cause snags or tears.
Fire Rating Documents (provided with the invoice)
Plastiflam® Retrac 280 has received a Euroclass B,s1-d0 recorded in the WFRGENT Classification Report 16336E, as well as an M1 PV.
Storage
Storage in a room free of water and air, at temperatures between +5°C and +30°C, for approximately 6 months after the date of manufacture. Resistant to UV exposure for up to 12 months.
Safety notes
For more details, please refer to the valid safety data sheet from Protecflam Industries.
-
Made in FranceSome of our flame-retardant solutions are manufactured in France, at our factories in Loire-Atlantique, drawing on our expertise and in-house R&D department. This expertise enables us to refine our formulations and meet specific requirements.
-
Tests and performanceOur solutions are tested by accredited laboratories in accordance with current standards and protocols. The results of these tests are used to draw up technical documents certifying the performance and fire resistance of the products in question.
-
Technical ExpertiseFor over 25 years, Protecflam has been developing its expertise in the field of passive fire protection and the fire retardancy treatment of a wide range of materials. This experience enables us to support each project with an approach tailored to its specific requirements.
-
Personalized SupportFrom identifying your requirements to selecting the most suitable solution, our team is here to support you with your flame-retardant treatment projects. Whether it’s a workshop-based treatment or an on-site service, we tailor our approach to the specific requirements of your project.
