Fibroflam® CP Twin
Euroclass B (M1) twin eucalyptus / poplar fireproof plywood panels with red faces, generally intended for fittings, interior carpentry and furnishings.
Very good value for money. Good hold. Ideal for cutting. Its homogeneous faces give it a beautiful appearance.
Format 2500 x 1220 mm or 3.05 square meters.
Sale in lots of 5 panels, i.e. 15.25 square meters.
Example: you order 3 units, you will receive 15 panels.
Shipping on quote or collection from our warehouses.
Choose your packaging
Fibroflam® CP Twin is a fireproof wood panel with a red wood veneer.
The basic plywood consists of eucalyptus cross plies, with a penultimate BB/BB poplar ply (choice III repaired: EN 635-2), covered with a red wood veneer. Its density is 610 kgs/m3 (+/- 10%).
- Front: Exotic wood of choice B, according to EN 635-2
- Face: exotic wood of choice BB, according to EN 635-2
- Thickness of veneers, face/face: ≥ 0.17 mm (finished)
- Structural use: no.
- Usage class: “Protected Exterior” damp environment Class 2 – EN 636-2.
- Humidity ratio (EN 322): 12% +/- 2%
- Bonding with urea formalin melamine (MUF) Class 3, according to EN 314-2.
Panels from legal cuts in accordance with European regulations.
CE marking (EN 13986 +A1): Yes – CE 4
Formaldehyde emission (EN 717-2): E1
VOC Emissions: B
It is possible to add a varnish-type finish to our fireproof panels, we recommend that you apply the Verniflam® F3 non-degrading varnish for a brush, brush or roller pass, or the Verniflam® F3A non-degrading varnish, for a spray gun pass.
Contact us if you would like to have the products shipped to you
-
Made in FranceSome of our flame-retardant solutions are manufactured in France, at our factories in Loire-Atlantique, drawing on our expertise and in-house R&D department. This expertise enables us to refine our formulations and meet specific requirements.
-
Tests and performanceOur solutions are tested by accredited laboratories in accordance with current standards and protocols. The results of these tests are used to draw up technical documents certifying the performance and fire resistance of the products in question.
-
Technical ExpertiseFor over 25 years, Protecflam has been developing its expertise in the field of passive fire protection and the fire retardancy treatment of a wide range of materials. This experience enables us to support each project with an approach tailored to its specific requirements.
-
Personalized SupportFrom identifying your requirements to selecting the most suitable solution, our team is here to support you with your flame-retardant treatment projects. Whether it’s a workshop-based treatment or an on-site service, we tailor our approach to the specific requirements of your project.
